Pre-Order (JUNE 2026) Now Closed!

DELIVERY ETA: JULY 2026

Stay tuned for the next drop ! Thank you for your patience and understanding!

The original Samurai Edge signature grips, made to the highest quality and most faithfully reproduced. Based on the original game series, as seen in Resident Evil 3 (1999), Resident Evil 2 Remake (2019), etc.

Fits Beretta 92/96, M9, M9A1 series pistols that uses standard full size grips (Excludes models equipped with frame mount safeties and/or heel magazine releases).

FEATURES:

• Precision milled hardwood with exclusive integral magazine well

• Removable, textured plastic grip inserts (also available separately)*

• Brass medallions with style choice

• Hand fitted and finished

• Made in USA

*removable grip inserts allow you to swap out existing sets for different medallions or Prototype style. NOT COMPATIBLE with first generation S.E. Grips with permanently affixed grip inserts and Barry Burton Ver. II Grips.

NOTICE:

• Lead-time is typically 3~4 weeks after order placement.

• Hardwood will vary in grain figure, color and shade, no two sets are alike! Wood type is generally walnut, but may also be cherry or maple depending on supply availability.

• Certain aftermarket magazines with oversized baseplates (such as Mec-Gar) are NOT compatible due to the width of the baseplate being too wide, and may cause damage to the grips if forcibly inserted. Only use OEM magazines.

• Due to the nature of wood milling, there may be slight variations in thickness between grip panels. Magazine releases with the oversized button pad that overlaps the grip surface may sometimes not be compatible and cause interference of function and/or marring of the wood finish. CDW recommends using only standard OEM magazine releases, or extended magazine releases that do not have the oversized button pad.

DISCLAIMER:

Gunsmith installation recommended. CDW cannot be held responsible against damage, loss or injuries resulting from the improper install / use of this product. By purchasing you agree to these terms.

READ FIRST:

S.E. GRIPS USER GUIDE - CLICK HERE

Replacement grip inserts for use with our original Samurai Edge signature grips. Perfect if you wish to change the medallion styles on your existing set or to keep as spares. Made of hard black plastic with molded texturing. Note that this is only for the grip inserts, not the full SE Grips set.

MODELS:

• STANDARD:

  The signature Samurai Edge grip inserts featuring S.T.A.R.S. medallions of your choice.

• PROTOTYPE:

  Grip Inserts as seen on the original Kendo Custom Phase 1 and Phase 2 prototype pistols, the predecessor to the Samurai Edge, and feature no medallions. As seen in Resident Evil 2 Remake, 2019.

NOTICE:

Gunsmith installation recommended. CDW cannot be held responsible against damage, loss or injuries resulting from the improper install / use of this product. By purchasing you agree to these terms.

Compatible with current generation S.E. Grips only. Does not work with early S.E. grips with permanently affixed grip inserts and Barry Burton Ver. II Grips.

READ FIRST:

S.E. GRIPS USER GUIDE - CLICK HERE

Our Barry Burton Compensator kit provide the essential components to give you the most authentic look and function. 3 models to choose from. For Beretta 92/96 series pistols.

FEATURES:

• Exact exterior appearance and functional

• Precision machined

• Alloy accessory/picatinny rail

• Removable steel front sight

• Steel guide rod

• Black oxide/anodized finish

• Authentic engravings (Standard and V1.5 models only)

• Hardware and installation tools included

• Drop in install, no permanent modifications to firearm necessary.

MODELS:

STANDARD:

The OG, modeled after the Tokyo Marui Biohazard 5th Anniversary (2001) Edition, also as seen in Resident Evil (2002).

Featuring:

• Steel Compensator

• Alloy weaver rail

• For use with 9mm / .40 S&W

VER. 1.5:

Same as the Standard model but with a VER. II picatinny rail.

Featuring:

• Steel Compensator

• Alloy picatinny rail

• For use with 9mm / .40 S&W

VER. II (IN DEVELOPMENT):

The canon successor to the original Standard model, as seen in Resident Evil: Revelations 2 (2015).

Featuring:

• Steel compensator

• Alloy picatinny rail

• For use with 9mm only

VER. II REPLACEMENT PICATINNY RAIL:

Picatinny rail replacement/upgrade for the Standard Barry Burton Compensator, (converts from Standard Model to V1.5). This is the same part used on the Ver. II Compensators. Fitting may be required.

Compatibility Requirements:

• Beretta 92/96 series pistols with a full size, non-railed, and straight dust cover frames

• Full length (4.9”/125mm) barrel recommended.

• Brigadier style slide: Recommended for Standard and V1.5 models, required for V2.

• Will NOT work with the following models: Compact, Centurion, , slanted dust cover frame, any models with accessory rail(M9A1, 92/96A1, 92X, and etc.).

  If you’re unsure if this kit is compatible with your particular gun, or require assistance with installation, please contact us and we’ll gladly help.

INSTALLATION GUIDE

WARNING:

• Installation by a qualified gunsmith is highly recommended. CDW is not responsible for loss or damage resulting from improper installation and use of this kit.

• While engineered specifically to be live fire capable, understand that this product is based off of fictional designs with focus primarily for its exterior/cosmetic features, therefore we do not make claims for its effectiveness in muzzle control.

• Firearm shown is for demonstration purpose and is not included.

• Specifications subject to change without notice.

Samurai Edge style extended slide release for Beretta 92/96 series pistols. Direct replacement.

FEATURES:

• Machined from Alloy Steel Bar stock

• Heat Treated

• Black Oxide

NOTE:

• Gunsmith installation recommended.

• Parts are drop in fit majority of the time but in some rare instances may require minor fitment.

• BLEM: Items in full working condition with minor cosmetic defects

COMPATIBILITY:

Certain aftermarket grips (particularly wood) that are thicker than OEM spec may require fitting in order to clear the extended finger pad. We recommend using this part with CDW’s SE series grips or OEM plastic/wood grips.

The most authentic and high quality Samurai Edge style rear sights for Beretta 92/96 series pistols. Direct OEM replacement.

FEATURES:

• Authentically modelled “Samurai Edge” rear sight

• Precision CNC machined steel

• 3 dot (standard model)

• Sight Height: 7.4mm/.290” (Standard/V1 models), 10.8mm/.425”(V2 model)

• Hex key sight screw*

• Black oxide finish

NOTE:

*1.5mm Hex key required (not included) for tightening the sight screw, note that this screw is designed as a cosmetic feature and should not be torqued as breakage may occur due to its small size.

Gunsmith installation recommended.

Extended magazine base modeled after Barry Burton’s Samurai Edge, direct replacement for the OEM Beretta 92/96 series magazine base plate.

FEATURES:

• Precision machined aluminum alloy

• EDM cut serration on front strap

• Hard anodized black

• For use with OEM magazines only.

• Price is for one (1)

MODELS:

VERSION 1:

• For 10/15rd 9mm and 10rd .40 magazines.

VERSION 2:

• For 17rd 9mm and 11/12rd .40 magazines.

WARNING:

• Magazine spring is under tension, exercise care and utilize eye protection during assembly/disassembly

• Product does not alter the original capacity of the magazine.

• Gunsmith installation recommended.

The same grip medallions used on our S.E. Grips, now available as a standalone item perfect for customizing your own grips with the S.T.A.R.S. theme.

FEATURES:

• Metal Diecast with Enamel Fill

• 20mm (0.79”)

• Sold as a pair

NOTE:

• Add item to to cart to select color options.

• Not directly compatible with airsoft grips, fitting will be required.

This is a faithful replica of the grips medallions as seen equipped on the Desert Eagle a.k.a. the “Magnum” used by the main protagonist Leon S. Kennedy as seen in Resident Evil 2 (1998).‍ ‍

This is the same medallion used to make the limited production R.P.D. Desert Eagle Grips. Judging from the medallions and the ornate appearance, one may deduce that this was intended for use as a commemorative issue, perhaps for presentation to certain R.P.D. officials.

FEATURES:

• Authentic design

• Diecast metal in gold finish

• 20mm OD

• Sold as a pair (2)

Kendo Custom Shop Name Plate lets you customize your own gun case (or anything, really) with style!

FEATURES:

• 20 ga. brushed aluminum plate w/ dark blue print

• Size: 2” x 2.75”

• Self-adhesive backing

NOTE:

• For best result, mount on a smooth, flat surface. Peel off protective film from plate after mounting.

• Item not returnable once the protective film and/or the self adhesive backing has been peeled off.

• Gun case shown for demonstration purposes only and is not included.

• Design subject to change without notice.

The R.P.D. / U.S.S. (Umbrella Security Service) ID plate is the final touch to make your custom rig official!

FEATURES:

• 2 templates to choose from (R.P.D. Samurai Edge or U.S.S. Desert Eagle)

• Aluminum plate with black print

• Fully customizable (model, serial number, name, issue date), or choose from a character preset

• Stamped lettering

• Size: 3”x1”

• Self adhesive backing

CHARACTER PRESETS:

C. REDFIELD

• MOD. VER. M92F-C / SE02

• BADGE 0738

• ISSUE DATE: 06-22-1998

J. VALENTINE

• MOD. VER. M92F-C / SE01

• BADGE 0823

• ISSUE DATE: 06-22-1998

B. BURTON

• MOD. VER. M96F-C / SE03

• BADGE 9087

• ISSUE DATE: 06-22-1998

R. CHAMBERS

• MOD. VER. M92F/SE

• BADGE 0729

• ISSUE DATE: 06-22-1998

A. WESKER

• MOD. VER. M92F-C / SE06

• BADGE 0325

• ISSUE DATE: 06-22-1998

B. VICKERS

• MOD. VER. M92F / SE

• BADGE 0789

• ISSUE DATE: 06-22-1998

LEON S. KENNEDY

• MOD. VER. 10 INCH CUSTOM

• BADGE 0635

• ISSUE DATE: 06-22-1998

NOTE:

• Product made to order, please allow 3~5 days lead time.

• Character presets are compiled to the best of our research and subject to updates and corrections.

• Template design subject to change without notice.

• Stamped letterings are done with a manually operated machine and will have slight variance in spacing and alignment, adding to the authenticity of the finished product.

• Limit to 13 characters (including space) per line for best result. Entries in excess of 13 characters may be subject to abbreviation at our discretion in order to fit all the information.

• No returns or cancellations accepted once the plate is made.

• Ensure accuracy of your entries, no final proof will be provided.

• Gun case shown is not included.

Based on Silent Hill 2 Remake (2024), this is a faithful replica of the grips medallions as seen equipped on the handgun used by the main protagonist James Sunderland.

FEATURES:

• Die struck metal

• 3/4” OD

• In-game accurate design

• Two styles available (with or without black fill)

• Sold as a set (2)

NOTICE:

• Installed Image shown for demonstration purposes only, no grips / firearm is included!